V Groove Measuring Kits AXL012

Introducing the V Groove Measuring Kits for the AXL012, designed to ensure precise measurements of 'V' grooves after machining. This kit is essential for maintaining accuracy and quality in flange machining applications.

Key Features:

• Accurate Measurements: Allows for precise measurement of 'V' grooves, ensuring they meet required specifications.
• Easy Assembly: Includes components that are straightforward to assemble and use, facilitating quick and efficient measurements.
• Versatile Use: Compatible with the AXL012 machine, enhancing its functionality and application range.

Measurement Procedure:

1. Remove the ‘V’ Groove Saddle Assembly: Prepare the machine by removing the saddle assembly used for 'V' groove machining.
2. Fit Datum Balls: Use an Allen key to attach a pair of suitable datum balls to each trammel block.
3. Assemble Trammel Blocks: Slide the trammel blocks onto the measuring bar, leaving them free to slide for initial setup.
4. Position Measuring Assembly:
   • Place the measuring assembly onto the flange face.
   • Lock one trammel block onto the shaft using the locking screw.
   • Position the datum balls against the outer face of the 'V' groove at its widest point and lock the remaining block in place.
5. Measure Distance (X): Use a calibrated micrometer or vernier to measure the distance to the outside of the balls. Repeat this step to ensure a consistent reading. Perform the same procedure for the inner face of the groove.
6. Check Groove Depth (Z): Measure the depth of the groove using a depth micrometer.
7. Refer to Standards: Use the obtained measurements to refer to the technical specifications standards tables (API, ANSI, etc.) to ensure compliance.

Included Components:

• Trammel blocks
• Measuring bar
• Datum balls
• Locking screws
• Calibration tools (micrometer or vernier, depth micrometer)